Tile adhesives and natural stone laying

Products

Thin-bed mortar

X7G – The formula for success

Waterproof
Frost resistant
Flexible
Thin-bed mortar according to ÖNORM EN 12004 as type C2 TE S1

Images and Videos

Area of Application
Area of Application X7G – The formula for success

Indoor and outdoor. Walls and floors.

For applying and laying

Earthenware and stoneware tiles

Glass and porcelain mosaics

Concrete slabs and moisture-resistant natural stone slabs.

Porcelain stoneware ＜0.2 m² tile size for indoor use.

For applying

suitable building boards, e.g. gypsum boards

Insulation boards made of rigid foam and mineral fibres

Tile elements (rigid foam insulation boards with mortar coating on both sides).

Plating on heated screeds.

Tile laying in swimming pools. Bonding of ceiling, visible and sound insulation panels.

For bonding tiles and insulating building materials, non-combustible building material class A 1 according to DIN EN 13501-1:2010 Test mark PA-III 4.53

Technical data

Technical data X7G – The formula for success

Mixing ratio approx.

Component A	Component B
10.5 l water	25 kg powder
1 Part water	2 RT powder

Material requirement approx.

Material requirements	Toothing (mm)	Condition
1.00 kg/m²	3 x 3 x 3	Depending on the substrate condition and the trowel notch used
1.70 kg/m²	6 x 6 x 6	Depending on the substrate condition and the trowel notch used
2.00 kg/m²	8 x 8 x 8	Depending on the substrate condition and the trowel notch used

Bulk density approx.

1,40 kg/l

Fresh weight approx.

1,50 kg/l

Processing time approx.

5 Hour(s)

Insertion time (EN 1346) approx.

30 Minutes

Correction time approx.

30 Minutes

Can be walked on after approx.

24 Hours with sufficient drying or hardening

Application Ambient conditions

+20°C

Suitable for underfloor heating

Yes

Tested according to DIN EN 12004

C2 TE S1

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

Bags containing 25 kg net

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
Declaration of Performance
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
The X7G formula for success – 25 kg	paper bag	4001	9006445040015	40 bags/pallet

Links and Calculator

Calculator for X7G – The formula for success

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

X7G – The formula for success

Area of Application X7G – The formula for success

Technical data X7G – The formula for success

Links and Downloads

Coverage & Packaging

Calculator for X7G – The formula for success

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project