Tile adhesives and natural stone laying

Products

MICROTEC3 Flexible adhesive

ARDEX X 90

Meets ARDEX MICROTEC3 requirements
For adhesive bed thicknesses up to 15 mm
Full embedding without fluidisation behaviour
Long working time of 1 hour
Walkable after 3 hours
Very high initial adhesion
Easy processing

Images and Videos

Area of Application
Area of Application ARDEX X 90

Indoor and outside. Walls and floors.

Creating a flexible adhesive bed.

For installing and laying

earthenware, stoneware and porcelain stoneware

glass and porcelain mosaics

Concrete stone slabs

moisture-resistant natural stone slabs.

Laying tiles and slabs

on balconies and terraces

in swimming pools

in heavy-duty industrial and commercial areas.

For fixing ceramic cladding to facades.

For installing and laying tiles on concrete and masonry substrates that are still shrinking (at least 3 months old).

For tiling on heated screeds.

Efflorescence-free installation of stoneware and porcelain stoneware tiles, as well as concrete and natural stone slabs, for both indoor and outdoor use. Particularly suitable for laying large-format tiles in outdoor areas and areas subject to constant moisture, e.g. walk-in showers.

Technical data

Technical data ARDEX X 90

Mixing ratio approx.

Component A	Component B
8.5 l water	25 kg powder
1 Part water	2.25 RT powder

Material requirement approx.

Material requirements	Toothing (mm)	Condition
1.10 kg/m²	3 x 3 x 3	On smooth substrates
2.10 kg/m²	6 x 6 x 6	On smooth substrates
2.60 kg/m²	8 x 8 x 8	On smooth substrates
3.20 kg/m²	10 x 10 x 10	On smooth substrates

Bulk density approx.

1,10 kg/l

Fresh weight approx.

1,60 kg/l

Processing time approx.

60 Minute(s)

Insertion time (EN 1346) approx.

30 Minutes

Correction time approx.

15 – 20 Minutes

Shear strength

Shear strength
≥ 2.0 N/mm²
≥ 4,0 N/mm2

Grouting on the Wall after approx.

2 Hour(s)

Application Ambient conditions

+20°C

Adhesive tensile strength approx.

Ambient condition	Bond strength	Condition	Time
Dry, wet	1.0 – 2.0 N/mm²	For stoneware tiles	After 28 days
Warm	1.0 – 1.5 N/mm²	For stoneware tiles	After 28 days
Frost-thaw cycle	1.0 – 1.5 N/mm²	For stoneware tiles	After 28 days

Suitable for underfloor heating

Yes

Tested according to DIN EN 12004

C2 FTE S1

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

25 kg net bag

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
Declaration of Performance
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX X 90 - 25 kg	paper bag	4735	9006445047359	40 bags/pallet

Links and Calculator

Calculator for ARDEX X 90

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX X 90

Area of Application ARDEX X 90

Technical data ARDEX X 90

Links and Downloads

Coverage & Packaging

Calculator for ARDEX X 90

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project