Tile adhesives and natural stone laying

Products

Flexible bedding mortar

ARDEX X 32

With ARDURAPID® effect
For outdoor and indoor use
Discolouration- and efflorescence-free laying of natural stone slabs, natural stone tiles, concrete stone slabs and cotto slabs
For laying stoneware and porcelain stoneware tiles
For laying in thin, medium and thick bed applications
Levelling wall and floor areas
Walkable/available after 3 hours
Mortar bed thicknesses from 3 to 30 mm
Water-repellent and weather-resistant
Quick-drying thanks to crystalline water binding

Images and Videos

Area of Application

Area of Application ARDEX X 32

Indoor and outdoor. Walls and floors.

Discolouration-free and efflorescence-free laying of natural stone tiles and natural stone slabs made of marble, Jura marble, granite, quartzite and similar materials, cotto slabs and concrete stone slabs.

Fixing and laying of tiles of stoneware and fine stoneware.

Levelling wall and floor areas before installation work.

Plating on heated screeds.

Laying on concrete and masonry substrates that are still shrinking (at least 3 months old).

Technical data

Technical data ARDEX X 32

Mixing ratio approx.

Component A	Component B	Consistency
8 – 8.5 l water	25 kg powder	For laying on floors
1 Part water	2.75 RT powder	For laying on floors
7.5 l water	25 kg powder	For attaching to walls
1 Part water	3 RT powder	For attaching to walls

Material requirement approx.

Material requirements	Toothing (mm)	Condition
3.30 kg/m²	8 x 8 x 8	On smooth substrates
1.20 kg/m²		Per mm order thickness

Bulk density approx.

1,10 kg/l

Fresh weight approx.

1,60 kg/l

Processing time approx.

60 Minute(s)

Insertion time (EN 1346) approx.

20 Minutes

Correction time approx.

20 – 30 Minutes

Can be walked on after approx.

3 Hours, grouting possible thereafter

Application Ambient conditions

+20°C

Adhesive tensile strength approx.

Ambient condition	Bond strength
Dry	1.0 – 2.0 N/mm²
Wet	1.0 – 1.5 N/mm²
Warm	1.0 – 2.0 N/mm²
Frost-thaw cycle	1.0 – 1.5 N/mm²

Bending tensile strength approx.

Time	Bending tensile strength approx.
After 1 day	2.5 N/mm²
After 7 days	4.0 N/mm²
After 28 days	6.0 N/mm²

Compressive strength approx.

Time	Compressive strength of approx.
After 1 day	10 N/mm²
After 7 days	15 N/mm²
After 28 days	20 N/mm²

Suitable for underfloor heating

Yes

Tested according to DIN EN 12004

C2 FTE S1

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

Packaging

25 kg net bag

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
Declaration of Performance
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX X 32 - 25 kg	paper bag	4621	9006445046215	40 bags/pallet

Links and Calculator

Calculator for ARDEX X 32

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Application height in mm
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX X 32

Area of Application ARDEX X 32

Technical data ARDEX X 32

Links and Downloads

Coverage & Packaging

Calculator for ARDEX X 32

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project