Tile adhesives and natural stone laying

Products

Setting mortar

ARDEX X 30

High safety due to fibre reinforcement
For mortar thicknesses up to 30 mm
No efflorescence thanks to special additives
Easy processing
No additional bonding slurry required
High strength

Images and Videos

Area of Application

Area of Application ARDEX X 30

Indoor and outdoors. Walls and floors.

For the installation of moisture-resistant and dimensionally stable natural stone and concrete slabs using thin-bed, medium-bed and thick-bed methods.

Ideally suited for laying slabs with wide thickness tolerances and high dead weights.

Laying of treads and risers made from concrete and natural stone slabs using medium-bed and thick-bed methods.

Technical data

Technical data ARDEX X 30

Mixing ratio approx.

Component A	Component B
8.25 l water	25 kg powder
1 Part water	2.75 RT powder

Material requirement approx.

Material requirements	Toothing (mm)	Condition
3.80 kg/m²	10 x 10 x 10	On smooth substrates
1.10 kg/m²		Per mm order thickness

Bulk density approx.

1,10 kg/l

Fresh weight approx.

1,60 kg/l

Processing time approx.

70 Minute(s)

Insertion time (EN 1346) approx.

30 Minutes

Correction time approx.

15 Minutes

Can be walked on after approx.

3 – 4 Hour(s)

Application Ambient conditions

+20°C

Bending tensile strength approx.

Time	Bending tensile strength approx.
After 1 day	2.0 N/mm²
After 7 days	3.0 N/mm²
After 28 days	3.5 N/mm²

Compressive strength approx.

Time	Compressive strength of approx.
After 1 day	8 N/mm²
After 7 days	10 N/mm²
After 28 days	15 N/mm²

Suitable for underfloor heating

Yes

Tested according to DIN EN 12004

C2 E

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

25 kg net bag

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
Declaration of Performance
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX X 30 - 25 kg	paper bag	4724	9006445047243	40 bags/pallet

Links and Calculator

Calculator for ARDEX X 30

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX X 30

Area of Application ARDEX X 30

Technical data ARDEX X 30

Links and Downloads

Coverage & Packaging

Calculator for ARDEX X 30

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project