Building materials

Products

Rapid hardening cement 32.5 R-SF

ARDEX WSZ

Cement of strength class 32.5 R with early high strength properties
Generally approved by the building authorities through the DIBt, Berlin
Approval no. Z-3.12-1206
For producing mortar and concrete with early initial strength

Images and Videos

Area of Application
Area of Application ARDEX WSZ

Production of mortars with early initial strength for fixing dowels and anchors for load-bearing structures that require building authority approval.

For example:

Facade cladding

Roof elements

Scaffolding brackets

Stair stringers

Steps

suspended ceilings

Ceiling cladding

Railings

Handrails

Window sills

Sanitary facilities

Heating systems

Shelves, etc.

Manufacture of concrete and mortar for repairing concrete and reinforced concrete components in accordance with DIN 1045, which are not exposed to thermal stresses exceeding the usual natural climatic temperatures:

Pillars

Carriers

Support

Ceiling slabs

Wall panels

Concrete soles

Facade elements

Road surfaces

Runways

Tunnel components

All types of precast concrete elements, etc.

The early initial strength of the concrete or mortar allows moulds and formwork to be removed and precast elements to be transported after just 2 to 4 hours.

Production of fast-hardening concrete and mortar for laying work and fastening measures for:

Pipes

Rails

Rods

Posts

Supports

Gate brackets

Fence posts

Sign posts

Foundations

Wall and floor slabs

Pavement slabs, etc.

Production of floor screeds that can be walked on quickly in outdoor and wet areas.

For outdoor and indoor use.

Technical data

Technical data ARDEX WSZ

Bulk density approx.

1,10 kg/l

Grinding fineness

Specific surface area according to Blaine, in accordance with EN 196, Part 3, 5300 +/- 500 cm²/g

Start of solidification

According to EN 196, Part 3, after 20 minutes at the earliest

Room resistance

In accordance with EN 196, Part 3, is given

Compressive strength of standardised mortar according to EN 196, Part 1

Time	Compressive strength of approx.
After 2 hours	4 N/mm²
After 1 day	16 N/mm²
After 2 days	23 N/mm²
After 7 days	34 N/mm²
After 28 days	45 N/mm²
After 90 days	47 N/mm²

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

25 kg net bag

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX WSZ - 25 kg	paper bag	4131	4024705511100	40 bags/pallet

Links and Calculator

Calculator for ARDEX WSZ

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX WSZ

Area of Application ARDEX WSZ

Technical data ARDEX WSZ

Links and Downloads

Coverage & Packaging

Calculator for ARDEX WSZ

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project