Tile adhesives and natural stone laying

Products

Epoxy adhesive

ARDEX WA white

Epoxy resin adhesive
Complies with R2T requirements according to EN 12004
Chemical resistant
Highly resilient
Easy to use
Good stability

Images and Videos

Area of Application
Area of Application ARDEX WA white

Indoor and outdoor, walls and floors.

White two-component epoxy resin adhesive mortar. ARDEX WA white epoxy adhesive is waterproof, frost and weather resistant after hardening and is particularly suitable for use in areas subject to high chemical and mechanical stress.

For preparing and laying:

ceramic tiles and slabs

clinker bricks and split tiles

mosaic

for applications where cementitious mortars are not sufficiently resilient or resistant, e.g. in slaughterhouses, dairies, commercial kitchens, breweries, battery rooms, swimming pools and spas, and other areas subject to chemical or high mechanical stress. Particularly suitable for bonding translucent glass mosaics/glass tiles in wet areas (prevents clouding due to moisture penetration).

In small areas, ARDEX WA white epoxy adhesive can also be used for grouting.

Technical data

Technical data ARDEX WA white

Mixing ratio

Specified by the container

Material requirement approx.

Material requirements	Toothing (mm)	Condition
1.50 kg/m²	3 x 3 x 3	For bonding to smooth substrates
2.70 kg/m²	6 x 6 x 6	For bonding to smooth substrates
3.70 kg/m²	8 x 8 x 8	For bonding to smooth substrates

Fresh weight approx.

1,50 kg/l

Processing time approx.

60 Minute(s)

Insertion time (EN 1346) approx.

30 Minutes

Correction time approx.

30 Minutes

Can be walked on after approx.

12 Hours with sufficient hardening

Application Ambient conditions

+20°C

Adhesive tensile strength approx.

Ambient condition	Bond strength	Time
Dry, wet	2.5 N/mm²	After 28 days

Bending tensile strength approx.

Time	Bending tensile strength approx.
After 1 day	30 N/mm²
After 28 days	38 N/mm²

Compressive strength approx.

Time	Compressive strength of approx.
After 1 day	43 N/mm²
After 28 days	57 N/mm²

Tested according to DIN EN 12004

R2 T

Labelling according to GHS/CLP

Labelling according to GHS/CLP	Component
See relevant safety data sheet	Resin
See relevant safety data sheet	Hardener

Labelling according to ADR

Component	Labelling according to ADR
Resin	See relevant safety data sheet
Hardener	See relevant safety data sheet

GISCODE

RE1 = Epoxy resin products, solvent-free, sensitising

Packaging

Bucket with 3 kg ARDEX WA white base paste,
insert can with 1 kg ARDEX WA white hardener

Storage

Can be stored in dry rooms for approx. 18 months in the original sealed container. Store buckets upright, do not tip. Setting of the pastes during storage has no effect on the quality of ARDEX WA.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX WA Epoxy Adhesive, white - 4 kg	Can	4446	4024705445139	90 cans/pallet

Links and Calculator

Calculator for ARDEX WA white

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX WA white

Area of Application ARDEX WA white

Technical data ARDEX WA white

Links and Downloads

Coverage & Packaging

Calculator for ARDEX WA white

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project