Grouts and silicones

Products

Epoxy grouting compound

ARDEX WA²

Chemical resistant
Highly resilient
Easy to insert and wash
For joint widths from 2–15 mm

Images and Videos

Area of Application

Area of Application ARDEX WA²

Indoor and outdoor. Walls and floors.

Grouting ceramic tiles, slabs, clinker bricks, split tiles and mosaics in case of stresses against which cementitious mortars are not sufficiently resilient or resistant, e.g. in slaughterhouses, dairies, commercial kitchens, breweries, battery rooms, swimming pools and spas, shower rooms, bathrooms, sales rooms, sports and leisure facilities and other areas subject to chemical or high mechanical loads.

For joint widths from 2 to 15 mm.

Classification according to EN 13888:
RG = Reaction resin grout

Technical data

Technical data ARDEX WA²

Colours

anthracite, grey, silver grey, white

Mixing ratio

Specified by the container

Material required for grouting approx.

Tile size	Joint width	Joint depth	Consumption
5 x 5 cm	3 mm	5 mm	0.90 kg/m²
10 x 10 cm	3 mm	5 mm	0.45 kg/m²
20 x 20 cm	3 mm	5 mm	0.25 kg/m²
30 x 30 cm	3 mm	5 mm	0.30 kg/m²
11,5 x 24 cm	3 mm	5 mm	0.30 kg/m²

Note

The additional losses due to excess material on the tiles amount to 0.10 – 0.20 kg/m², depending on the type of tile and working method.

Fresh weight approx.

1,50 kg/l

Processing time approx.

60 Minute(s)

Insertion time (EN 1346) approx.

30 Minutes

Correction time approx.

30 Minutes

Chemically resistant after approx.

7 Day(s)

Application Ambient conditions

+20°C

Adhesive tensile strength approx.

Ambient condition	Bond strength	Time
Dry/wet storage	2.5 N/mm²	After 28 days

Bending tensile strength approx.

Time	Bending tensile strength approx.
After 28 days	30 N/mm²

Compressive strength approx.

Time	Compressive strength of approx.
After 28 days	60 N/mm²

Tested according to DIN EN 13888

Labelling according to GHS/CLP

Labelling according to GHS/CLP	Component
See relevant safety data sheet	Resin
See relevant safety data sheet	Hardener

Labelling according to ADR

Component	Labelling according to ADR
Resin	See relevant safety data sheet
Hardener	See relevant safety data sheet

Packaging

Combination pack consisting of a bucket containing 3 kg of ARDEX WA paste and an insert can containing 1 kg of ARDEX WA hardener.

Storage

Can be stored in dry rooms for approx. 18 months in the original sealed container. Store buckets upright, do not tip. Setting of the pastes during storage has no effect on the quality of ARDEX WA.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
Declaration of Performance

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX WA epoxy grout anthracite - 4 kg	bucket	4829	4024705604147	90 cans/pallet
ARDEX WA epoxy grout, grey - 4 kg	bucket	4525	4024705604123	90 cans/pallet
ARDEX WA epoxy grout, silver grey, 4 kg	bucket	4242	4024705604185	90 cans/pallet
ARDEX WA epoxy grout, white - 4 kg	bucket	4524	4024705604130	90 cans/pallet

Links and Calculator

Calculator for ARDEX WA²

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX WA²

Area of Application ARDEX WA²

Technical data ARDEX WA²

Links and Downloads

Coverage & Packaging

Calculator for ARDEX WA²

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project