Wall levelling compounds

Products

Multi-purpose fast-curing putty

ARDEX R 4 RAPID

Fast drying thanks to ARDURAPID-Plus effect
Adheres to almost all substrates commonly used in construction without primer
Extendable to zero
Revision after 45 to 60 minutes

Images and Videos

Area of Application
Area of Application ARDEX R 4 RAPID

For indoor and outdoor use, walls, floors and ceilings.

Smoothing and filling of wall, ceiling and floor areas for wallpaper, paint coatings, dispersion plasters, wall and floor coverings on absorbent and non-absorbent substrates.

Filling cracks, deep holes, slits and joints.

For floors, for smoothing unevenness and trowel marks on gypsum and cement-based fillers.

Outdoors, ARDEX R 4 RAPID may only be used on floor areas subject to low stress (e.g. repairs to areas subject to foot traffic only) and is not suitable for direct use or for receiving 2K coatings.

For quick fixing of metal, joint and angle profiles.

As a rapid construction system for quick repairs.

Technical data

Technical data ARDEX R 4 RAPID

Mixing ratio approx.

Component A	Component B
0.4 l water	1 kg powder
1 Part water	2 RT powder

Material requirements

1.1 kg powder per m² and mm

Bulk density approx.

0,85 kg/l

Fresh weight approx.

1,50 kg/l

Processing time approx.

15 Minute(s)

Application Ambient conditions

+20°C

Bending tensile strength approx.

Time	Bending tensile strength approx.
After 1 day	2.5 N/mm²
After 7 days	3.5 N/mm²
After 28 days	5.5 N/mm²

Compressive strength approx.

Time	Compressive strength of approx.
After 1 day	11 N/mm²
After 7 days	15 N/mm²
After 28 days	20 N/mm²

PH value approx.

11.5

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

Bucket with 2.5 kg net

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX R 4 RAPID - 2.5 kg	bucket	3204	9006445032041	110 buckets/pallet

Links and Calculator

Calculator for ARDEX R 4 RAPID

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX R 4 RAPID

Area of Application ARDEX R 4 RAPID

Technical data ARDEX R 4 RAPID

Links and Downloads

Coverage & Packaging

Calculator for ARDEX R 4 RAPID

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project