Substrate preparation

Products

Multifunctional primer

ARDEX P 4 READY

For absorbent and non-absorbent substrates
Reliable bonding agent with a wide range of applications
Quick-drying
Solvent-free
Single-component
Drip- and splash-reduced consistency
Easy to apply

Images and Videos

Area of Application
Area of Application ARDEX P 4 READY

Indoor and outdoor. Floor, wall and ceiling.

Primer and bonding agent for absorbent and non-absorbent substrates such as:

Concrete,

Cement and lime-cement plasters,

Cement and calcium sulphate screeds,

Magnesite screeds,

Mastic asphalt,

Terrazzo, tiles and slab coverings,

Dispersion coatings,

old, waterproof adhesive residues,

Dry screeds,

PVC flooring,

Levelling compounds,

OSB boards,

lacquered wooden floorboards,

Chipboard,

ARDEX epoxy resin primers.

For use with tile adhesives, floor and wall levelling compounds.

Technical data

Technical data ARDEX P 4 READY

Material requirement approx.

Consumption	Condition
130 – 500 G/m	On absorbent substrates
80 – 130 G/m	On non-absorbent substrates

Density

Density
1.5 g/cm³

Base

Synthetic resin dispersion

Minimum substrate temperature

+5°C

Drying time approx.

Time	Condition
15 – 30 Minutes	On absorbent substrates
60 Minutes	On non-absorbent substrates
12 Hours	On calcium sulphate screeds for tile laying

Application Ambient conditions

+20°C

Suitable for underfloor heating

Yes

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 = very low emissions

GISCODE

D1 = Solvent-free dispersion installation materials

Packaging

Buckets with 2 kg and 8 kg net weight

Storage

Can be stored in a cool but frost-free place for approx. 12 months in the original sealed container.
Opened containers should be sealed tightly and the contents used up quickly.
Store in an upright position.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX P 4 READY - 2 kg	bucket	4776	9006445047762	180 buckets/pallet
ARDEX P 4 READY - 8 kg	bucket	4775	9006445047755	48 buckets/pallet

Links and Calculator

Calculator for ARDEX P 4 READY

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX P 4 READY

Area of Application ARDEX P 4 READY

Technical data ARDEX P 4 READY

Links and Downloads

Coverage & Packaging

Calculator for ARDEX P 4 READY

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project