Tile adhesives and natural stone laying

Products

MICROTEC natural stone and tile adhesive, white

ARDEX N 23 W NEW

For all types of natural stone
With ARDURAPID® effect
Excellent bond strength
Rapid drying
For adhesive bed thicknesses up to 15 mm
For producing an S2 adhesive in combination with ARDEX E 90

Images and Videos

Area of Application
Area of Application ARDEX N 23 W NEW

Indoor. Wall and floor.

Discolouration, efflorescence and deformation-free laying of natural stone and natural stone slabs, cast stone and cottop slabs using thin-bed and medium-bed methods.

Fixing and laying of:

Natural stone and natural stone slabs, cast stone and cottop slabs

light, translucent marble slabs and other natural stone slabs with a translucent character

Glass and porcelain mosaic

Tiles made of earthenware, stoneware and porcelain stoneware

Clinker bricks and split tiles

Application and laying on:*

Concrete

Masonry

Aerated concrete

Plaster of mortar groups II, III and IV

Gypsum, gypsum fibre board and other building boards

Laying on ARDEX Flexbone

Still shrinking substrates made of concrete and masonry (at least 3 months old)

Metal, glass, coatings, paint

Cement screeds

Heated screeds

Calcium sulphate screeds

Dry screeds*

old tiles and slab coverings

Wooden substrates*

and other suitable substrates.

*see also Preparation of the substrate

ARDEX N 23 W NEW cannot be used in areas such as swimming pools, outdoor areas, permanently wet areas such as walk-in showers, or in water exposure classes W4 to W6 according to ÖNORM B 3407. For these areas, we recommend MICROTEC adhesives ARDEX X 90 and ARDEX X 78.

Technical data

Technical data ARDEX N 23 W NEW

Mixing ratio approx.

Component A	Component B
6.75 – 7.25 l water	25 kg powder

Material requirement approx.

Material requirements	Toothing (mm)	Condition
1.20 kg/m²	3 x 3 x 3	On smooth substrates
1.80 kg/m²	6 x 6 x 6
2.40 kg/m²	8 x 8 x 8
2.80 kg/m²	10 x 10 x 10

Bulk density approx.

1,20 kg/l

Fresh weight approx.

1,40 kg/l

Processing time approx.

45 – 60 Minute(s)

Insertion time (EN 1346) approx.

30 Minutes

Correction time approx.

15 – 20 Minutes

Can be walked on after approx.

4 – 6 Hours, grouting possible thereafter

Application Ambient conditions

+20°C

Suitable for underfloor heating

Yes

Tested according to DIN EN 12004

C2 FTE S1

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

25 kg net bag

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
Declaration of Performance
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX N 23 W NEW - 25 kg	paper bag	8189	4024705438742	40 bags/pallet

Links and Calculator

Calculator for ARDEX N 23 W NEW

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX N 23 W NEW

Area of Application ARDEX N 23 W NEW

Technical data ARDEX N 23 W NEW

Links and Downloads

Coverage & Packaging

Calculator for ARDEX N 23 W NEW

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project