Landscaping and natural stone

Products

Cement based tile grout

ARDEX GF 3-1 K

GF 3-1K stone grey is already being delivered in the recycled container.
1-component, air-curing, ready-to-use grout with graded mineral grain mixture
Ready to use
Water-permeable
Slurryable with water
Can be used in light rain
Self-compacting
High frost resistance
Abrasion-resistant
After processing, protect from moisture for 24 hours

Images and Videos

Area of Application

Area of Application ARDEX GF 3-1 K

Outdoors, floors.

For grouting concrete block and natural stone paving, clinker and slab coverings with narrow joints. Suitable for garden paths, terraces and house entrances with pedestrian traffic only.

Can be applied in light rain, but protect from moisture for 24 hours (at +20°C), covering may be necessary!

ARDEX GF 3-1 K Tile grout is not suitable for use in indoor rooms or in swimming pool areas.

Technical data

Technical data ARDEX GF 3-1 K

Colours

sand-coloured, stone grey, basalt

Material requirement approx.

Condition	Length in cm	Width in cm	Consumption
For joint width 3 mm, joint depth 30 mm, for tile formats from	60	40	0.70 kg/m²
For joint width 3 mm, joint depth 30 mm, for tile formats from	40	40	0.80 kg/m²
For joint width 3 mm, joint depth 30 mm, for tile formats from	30	30	1.00 kg/m²
For joint width 10 mm, joint depth 30 mm, for small paving stones from	10	12	8.60 kg/m²
For joint width 10 mm, joint depth 30 mm, for small paving stones from	8	10	10.30 kg/m²
For joint width 10 mm, joint depth 30 mm, for small paving stones from	6	8	13.00 kg/m²

Fresh weight approx.

1,70 kg/l

Processing time approx.

45 Minute(s)

Processing temperature

+5°C – +25°C

Material temperature

+5°C – +25°C

Substrate temperature

+5°C – +25°C

Walkable

Fully loadable after 24 hours, after 7 days

Application Ambient conditions

+20°C

Bending tensile strength approx.

Bending tensile strength approx.
8.0 N/mm²

Compressive strength approx.

Compressive strength of approx.
16.0 N/mm²

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

Packaging

PP bucket with 25 kg net weight

Storage

Can be stored in dry rooms for approx. 18 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX GF 3-1 K basalt - 25 kg	bucket	7661	9006445076618	24 buckets/pallet
ARDEX GF 3-1 K sand-coloured - 25 kg	bucket	7660	9006445076601	24 buckets/pallet
ARDEX GF 3-1 K stone grey - 25 kg	bucket	7659	9006445076595	24 buckets/pallet

Links and Calculator

Calculator for ARDEX GF 3-1 K

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX GF 3-1 K

Area of Application ARDEX GF 3-1 K

Technical data ARDEX GF 3-1 K

Links and Downloads

Coverage & Packaging

Calculator for ARDEX GF 3-1 K

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project