Waterproofing
Products
Multifunctional epoxy resin
ARDEX EP 2000
- Solvent-free
- Chemical resistant
- Rollable and spreadable
- Easy to use
- High adhesive strength
- Two-component
-
Area of Application
Area of Application ARDEX EP 2000
Indoor and outdoor use. Floors.
Barrier against rising damp in concrete floors and cement screeds up to max. 8%. Primer and consolidation of substrates. Filling cracks in floor screeds and concrete. Production of epoxy screeds. Bonding agent.
Production of composite seals. For more information and processing recommendations for the production of composite seals, please contact our application engineering department on tel. no. 02754/7021-0.
-
Technical data
Technical data ARDEX EP 2000
Mixing ratio approx. Component A Component B Condition Is determined by the container when used as a primer and vapour barrier 1 Weight portion 8 Weight parts quartz sand When used as an epoxy resin screed, depending on the desired mechanical properties 1 Weight portion 11 Weight parts quartz sand When used as an epoxy resin screed, depending on the desired mechanical properties Material requirement approx. Component A Component B Consumption Condition 300 G/m 2.2 kg ARDEX EP 2000 17.3 kg quartz sand Per m² and cm with a mixing ratio of 1 : 8 1.6 kg ARDEX EP 2000 17.3 kg quartz sand Per m² and cm with a mixing ratio of 1 : 11 Fresh weight approx. 1,10 kg/l Processing time approx. 30 Minute(s) Can be walked on after approx. Time Condition 12 Hours When used as epoxy resin screed (mixing ratio 1:8) 12 Hours When used as epoxy resin screed (mixing ratio 1:11) 6 Hours As a primer coat Load capacity Can withstand mechanical stress after approx. 24 hours, can withstand chemical stress after approx. 7 days Ready for laying after approx. Covering Duration When used as epoxy resin screed (mixing ratio 1:8) 24 Hours When used as epoxy resin screed (mixing ratio 1:11) 24 Hours Application Ambient conditions +20°C Bending tensile strength approx. Time Bending tensile strength approx. Condition After 7 days 19 N/mm² When used as epoxy resin screed (mixing ratio 1:8) After 7 days 14 N/mm² When used as epoxy resin screed (mixing ratio 1:11) Compressive strength approx. Time Compressive strength of approx. Condition After 7 days 72 N/mm² When used as epoxy resin screed (mixing ratio 1:8) After 7 days 53 N/mm² When used as epoxy resin screed (mixing ratio 1:11) Labelling according to GHS/CLP Labelling according to GHS/CLP Component See relevant safety data sheet Resin See relevant safety data sheet Hardener Labelling according to ADR Component Labelling according to ADR Resin See relevant safety data sheet Hardener See relevant safety data sheet Packaging 4.5 kg tin with lid unit net;
1 kg tin with lid unit netStorage Can be stored in dry rooms for approx. 12 months in the original sealed container. -
Downloads
Links and Downloads
-
Product details
Coverage & Packaging
ART.-BEZ. Coverage Item Number EAN Packaging ARDEX EP 2000 - 1 kg Can 4984 4024705601702 10 cans/box - 340 cans/pallet ARDEX EP 2000 - 4.5 kg Can 4691 9006445046918 65 cans/pallet -
Links and Calculator
Calculator for ARDEX EP 2000
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Result
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Results
The number of kg required per square metre
On kg container is sufficient for:
m²
How many unit(s) will I need?
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Result
Required quantity in ml
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Results
The number of kg required per square metre
On kg container is sufficient for:
m²
How many unit(s) will I need?
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Result
The number of kg required
The number of units required for your project
Quantity of chippings in kg
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage
Select
Results
The number of kg required
The number of units required for your project
The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage