Screeds

Products

Rapid cement

ARDEX A 35

With ARDURAPID® effect
Walkable after 3 hours
Dry and ready for installation after 1 day
With optimised processing properties
Working time 60 minutes
More consistent consistency even with longer mixing times and conveying distances
Easier distribution and application of mortar
Long smoothing and rubbing time
For producing quickly usable cement screeds on insulation layers, on separating layers and in composite structures
Meets the requirements of ÖNORM B 3732

Images and Videos

Area of Application

Area of Application ARDEX A 35

For indoor use, floors.

For producing cement screeds with ARDEX A 35 special cement, which is mixed with sand of 0–8 mm grain size and water to form an earth-moist to soft-plastic screed mortar.

Cement screeds made with ARDEX A 35 can be walked on after just 3 hours, are ready for floor coverings after just 1 day when laid floating on a separating film, and achieve the minimum strengths specified in ÖNORM B 3732 after 1 day.

For the application of floor screeds, the general guidelines for cement screeds, floating, on a separating layer or in a composite layer – ÖNORM B 3732 – apply. The rapid hardening of ARDEX A 35 rapid cement must be taken into account.

Technical data

Technical data ARDEX A 35

Mixing ratio approx.

Component A	Component B	Component C	Consistency
25 kg powder	100 kg sand	6 – 11 l water	Mixing ratio 1 : 4
25 kg powder	125 kg sand	6 – 11 l water	Mixing ratio 1 : 5

Material requirement approx.

Material requirements	Condition
3.7 kg	Per m² and cm with a mixing ratio of 1 : 4
3.1 kg	Per m² and cm with a mixing ratio of 1 : 5

Fresh weight approx.

2,00 kg/l

Processing time approx.

1 Hour(s)

Can be walked on after approx.

3 Hour(s)

Application Ambient conditions

+20°C

Shrinkage class

SW1 (ΔL < 0.2 mm/m) according to DIN 18560-1 / DIN EN 13892-9

Classification according to ÖNORM B 3732 Table A.7

SE 1

Bending tensile strength approx.

Time	Bending tensile strength approx.	Condition
After 1 day	5 N/mm²	At a mixing ratio of 1 : 4 by weight
After 3 days	6 N/mm²	At a mixing ratio of 1 : 4 by weight
After 28 days	7 N/mm²	At a mixing ratio of 1 : 4 by weight
After 1 day	4 N/mm²	At a mixing ratio of 1 : 5 by weight
After 3 days	5 N/mm²	At a mixing ratio of 1 : 5 by weight
After 28 days	6 N/mm²	At a mixing ratio of 1 : 5 by weight

Compressive strength approx.

Time	Compressive strength of approx.	Condition
After 1 day	25 N/mm²	At a mixing ratio of 1 : 4 by weight
After 3 days	35 N/mm²	At a mixing ratio of 1 : 4 by weight
After 28 days	45 N/mm²	At a mixing ratio of 1 : 4 by weight
After 1 day	20 N/mm²	At a mixing ratio of 1 : 5 by weight
After 3 days	30 N/mm²	At a mixing ratio of 1 : 5 by weight
After 28 days	35 N/mm²	At a mixing ratio of 1 : 5 by weight

Suitable for underfloor heating

Yes

PH value approx.

Corrosion behaviour

Does not contain any components that promote corrosion on steel

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

25 kg net bag

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX A 35 - 25 kg	paper bag	4018	9006445040183	40 bags/pallet

Links and Calculator

Calculator for ARDEX A 35

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX A 35

Area of Application ARDEX A 35

Technical data ARDEX A 35

Links and Downloads

Coverage & Packaging

Calculator for ARDEX A 35

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project