Screeds

Products

Quick setting mortar

ARDEX A 35 MIX

With ARDURAPID® effect
Walkable after 3 hours
Ready for laying after 1 day and fully usable
For producing quickly usable and ready-to-lay cement screeds in composite, on a separating layer, on an insulating layer
For repair work on cement screeds
For laying natural stone slabs without discolouration
Meets the requirements of ÖNORM B 3732

Images and Videos

Area of Application
Area of Application ARDEX A 35 MIX

For indoor use, floor.

For producing cement screeds indoors

in composite

on a separating layer

on insulation layer

For repairing and renovating cement screeds.

Discolouration-free laying of natural stone slabs made of marble, Jura marble, granite, quartzite, etc.

ARDEX A 35 MIX cement screeds can be walked on after just 3 hours and, when laid as a floating floor on a separating film, are ready for floor coverings after just 1 day.

The general guidelines and standards for cement screeds, e.g. ÖNORM B 3732, apply to the execution of the floor screeds. The rapid hardening of ARDEX A 35 MIX quick setting mortar must be taken into account.

Technical data

Technical data ARDEX A 35 MIX

Mixing ratio approx.

Component A	Component B	Consistency
2 l water	25 kg powder	For screed work
1 Part water	7 RT powder	For screed work
2.25 l water	25 kg powder	For laying work
1 Part water	6 RT powder	For laying work

Material requirement approx.

Material requirements
18.5 kg powder per m² and cm

Bulk density approx.

1,80 kg/l

Fresh weight approx.

2,00 kg/l

Processing time approx.

45 Minute(s)

Can be walked on after approx.

3 Hour(s)

Application Ambient conditions

+20°C

Shrinkage class

SW1 (ΔL < 0.2 mm/m) according to DIN 18560-1 / DIN EN 13892-9

Classification according to ÖNORM B 3732 Table A.7

SE 1

Bending tensile strength approx.

Time	Bending tensile strength approx.
After 1 day	4 N/mm²
After 3 days	5 N/mm²
After 28 days	6 N/mm²

Compressive strength approx.

Time	Compressive strength of approx.
After 1 day	23 N/mm²
After 3 days	30 N/mm²
After 28 days	32 N/mm²

Suitable for underfloor heating

Yes

PH value approx.

Corrosion behaviour

Does not contain any components that promote corrosion on steel

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

25 kg net bag

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
Declaration of Performance
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX A 35 Mix - 25 kg	paper bag	4094	9006445040947	40 bags/pallet

Links and Calculator

Calculator for ARDEX A 35 MIX

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX A 35 MIX

Area of Application ARDEX A 35 MIX

Technical data ARDEX A 35 MIX

Links and Downloads

Coverage & Packaging

Calculator for ARDEX A 35 MIX

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project