Landscaping and natural stone

Products

Universal joint

ARDEX G 40 OUTDOOR

For natural stones and concrete blocks that are not sensitive to moisture
Frost and de-icing salt resistant (XF4 according to ÖNORM B4710-1)
Resistant to steam jets, high temperatures and standard cleaning agents
High mechanical strength and abrasion resistance
Can be walked on after just 12 hours
Variable consistency setting (from stable to slurry)
According to RVS 08.18.01 Flexural strength >5MPa, compressive strength 25-40 MPa (after 28 days)

Images and Videos

Area of Application
Area of Application ARDEX G 40 OUTDOOR

Indoor and outdoor. Walls and floors.

For grouting

Concrete slabs

Natural stone slabs (moisture-resistant)

Stoneware and porcelain stoneware tiles

Split tiles and clinker tiles

Facade brick slips and glass blocks.

Paving work on commercial areas, stairways, pergolas, balconies and terraces.

For joint widths of 4 – 40 mm.

Technical data

Technical data ARDEX G 40 OUTDOOR

Colours

grey, basalt and sand beige

Mixing ratio approx.

Component A	Component B	Consistency
3.25 l water	25 kg powder	Stable consistency
4.5 l water	25 kg powder	Slurry consistency

Applies to

Joint width 10 mm, joint depth 5 mm for tiles and slabs

Material requirement approx.

Length in cm	Width in cm	Consumption
60	60	0.30 kg/m²
30	60	0.50 kg/m²
30	30	0.65 kg/m²
15	15	1.30 kg/m²
10	10	2.00 kg/m²

Note

The additional losses due to excess material on the tiles amount to 0.05–0.10 kg/m², depending on the surface finish and working method

Bulk density approx.

1,40 kg/l

Fresh weight approx.

2,10 kg/l

Processing time approx.

60 Minute(s)

Walkable

After 12 hours

Application Ambient conditions

+20°C

Ball pressure hardness approx.

Hardness	Time
20 N/mm²	After 1 day
30 N/mm²	After 3 days
40 N/mm²	After 7 days
50 N/mm²	After 28 days

Suitable for underfloor heating

Yes

Labelling according to GHS/CLP

See relevant safety data sheet

Labelling according to ADR

See relevant safety data sheet

EMICODE

EC 1 PLUS = very low emissions PLUS

GISCODE

ZP1 = cementitious product, low chromate content

Packaging

Bags containing 25 kg net

Storage

Can be stored in dry rooms for approx. 12 months in the original sealed container.

Downloads
Links and Downloads

Technical Data Sheet
Safety Data Sheet
EC 1 Plus Licence

Product details

Coverage & Packaging

ART.-BEZ.	Coverage	Item Number	EAN	Packaging
ARDEX G 40 OUTDOOR basalt - 25 kg	paper bag	4796	9006445047960	40 bags/pallet
ARDEX G 40 OUTDOOR grey - 25 kg	paper bag	4797	9006445047977	40 bags/pallet
ARDEX G 40 OUTDOOR sand beige - 25 kg	paper bag	4794	9006445047946	40 bags/pallet

Links and Calculator

Calculator for ARDEX G 40 OUTDOOR

Select
Select Product

Area to be covered in m²
Joint length in cm

Layer thickness in cm

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Trowel notch

Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Depth in mm Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Notch trowel
Area to be covered in m²

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select
Select Product

Area to be covered in m² (for 2 trowel layers)

Result

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

The calculator below will tell you how large an area a unit of the selected grout will cover, based on the dimensions that you supply. Simply enter the required figures in the boxes below and view the results in the results box. All tile and joint dimensions are rounded up to the nearest number (no decimal points).
Grout (check joint width)

Joint length in running meters

Tile Dimensions
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

Required quantity in ml

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Area to be covered in m² Installation thickness split mortar

Slab size
Length (mm)

Breadth (mm)

Joint Dimensions
Width (mm)

Depth (mm)

Results

The number of kg required per square metre

On kg container is sufficient for:

m²

How many unit(s) will I need?

Enter the area of your project here (m²):

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

Select

Mixing ratio
Joint length in meters

Layer thickness in cm
Area to be covered in m²

Results

The number of kg required

The number of units required for your project

The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage

ARDEX G 40 OUTDOOR

Area of Application ARDEX G 40 OUTDOOR

Technical data ARDEX G 40 OUTDOOR

Links and Downloads

Coverage & Packaging

Calculator for ARDEX G 40 OUTDOOR

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Result

The number of kg required

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

Required quantity in ml

The number of units required for your project

Select

Results

The number of kg required per square metre

On kg container is sufficient for:

How many unit(s) will I need?

The number of units required for your project

Result

The number of kg required

The number of units required for your project

Quantity of chippings in kg

Select

Results

The number of kg required

The number of units required for your project